GIK Acoustics Evolution PolyFusor
The GIK Acoustics Evolution PolyFusor© is a combination of a polycylindrical diffusor and an absorber merged into a single unit. Polycylindrical diffusors, or polyfusors, are known for their excellent dispersion characteristics over a very wide range. The curved front plate allows for virtually perfect spatial diffusion, while letting lower frequency waves pass through to the cavity of absorption behind.
The Evolution PolyFusor© is an attractive choice for a room where mid and high frequency chaos needs to be controlled but not removed. In a control room, the Evolution PolyFusor© can be used on the front and back walls, and rear sidewalls to keep the reverberation better mixed. In home theater and two-channel audio rooms, the Evolution PolyFusor© can be utilized on the rear or sidewalls, or behind dipole speakers, to round off sharp reflections. The Evolution PolyFusor© is also right at home anywhere in a tracking room or other large spaces, helping spread out the energy evenly across the whole room. Similar to our bass traps, the Evolution PolyFusor© can be used in corners for enhanced low frequency absorption.
The Evolution PolyFusor© smoothly transitions as a bass trap from 80Hz, to upper-bass/lower-mid scattering device, to diffusor. Starts diffusing at 600Hz.
The Evolution PolyFusor© provides a great mix of absorption and diffusion capabilities. Polyfusors offer a wider band of spatial diffusion than a typical quadratic residue diffusor, but do not affect the phase of the incident sound. Thus the Evolution PolyFusor© is best suited to spreading mid and high frequencies out in a room.
The Evolution PolyFusor© is constructed with a rigid base frame and curved front plate, and filled with absorption. We wrap the unit up in your choice of fabric, and level off the top and bottom with black or white caps for a clean finish.